SPF camera holder for spearfishing speargun

1 angled plate with a 9 mm hold for attaching the camera1 right-hand half casing1 left-hand half casing1 hand-tightened nut1 anti-slip elastomer seal1 stainless-steel spring / 1 stainless-steel screw shaft1 connector specific to the SUBEA reel (ref. 8526576)3 small stainless-steel screws for attachment to the reel

Overall dimensions = 11.5x9x5 cmUniversal configuration weight = 80 g"Subea reel" configuration weight = 58 gHolder plate area = 5x5 cmSideways offset of the angled part in relation to the tube axis = 4.5 cm

With its clip system, this kit can be attached to any speargun that has a round tube cross-section with an external diameter between 26 mm and 36 mm.Also compatible with certain cuttlefish-shaped barrels

Release the clip using the side bolt, which can be unscrewed by hand without the need for toolsPosition the clip under the tube, as close as possible to the butt of the gunOnce the clip is positioned on either side of the tube, retighten with the securing bolt, ensuring that the anti-slip seal is correctly positioned between the speargun tube and the clip.The camera holder plate can rotate 90° downwards to provide more clearance when reloading bands. Simply push and swing down.

Unscrew the screw at the base of the plate.Retighten the screw with the spring facing the reel connectorRemove the reel from the speargunScrew on the reel connector using the 3 stainless-steel screws providedFit the reel back onto the speargun

The kit does not contain:A waterproof cameraThe casing for a waterproof cameraAttachment screws for the underside of the camera