Hiking rain poncho - MT900 - 75L - Red - S/M

Designed and tested in the French Alps, this poncho with its long sleeves and full zip means you can put it on easily.

Fit and sizing information

Good coverage for hikersbetween 167 and 176 cm in height in size S/M,between 177 and 190 cm in size L/XLand wearing a backpack (capacity of 0 to 75 L).The hood adjusts in height and depth thanks to an elastic drawcord and toggle. It has a shaped visor, like a cap, for maximum face protection.The ends of the sleeves are cuffed with rip-tabs that prevent water from entering the sleeves.

Additional recommended products

To complement your outfit, a pair of waterproof over trousers or gaiters is recommended to protect your lower legs perfectly.Care products: spray or liquid water repellent treatment in the washing machine. To renew the fabric's water repellent-properties and optimise the garment's performance throughout its lifetime.

Storage bag

Built into the product.Zip fastening. The mesh surface prevents the fabric from being ruined if the garment is folded up while still wet. Sizes: L23.5 x H23.5 x D10 cm.

Pocket system

2 openings for easy access to the jacket or trouser pockets.

Safety

Retro-reflective stripe on the back for greater visibility when night walking on the roadside.

Component waterproofing

We measure a fabric's resistance to water pressure, expressed in terms of the height of a water column in mm (based on the ISO 811 standard). The higher the water pressure, the more waterproof the fabric. Components with a 5,000 mm rating can withstand the pressure of a 5,000 mm column of water (which is equivalent to a storm lasting 3 hours).

Waterproofing of the garment

Technologies: this garment has been validated in a shower test under 30 cm rain for 3 hours. This test reproduces the average conditions of a mountain storm.

Component breathability

Our rain poncho and cape ranges do not come with a waterproof/breathable membrane.Therefore, we recommend calm, gentle use to reduce perspiration rather than fast hiking!

Component water resistance

A fabric is water repellent when it allows water slide over its surface without seeping in. This prevents the fabric from soaking up water and keeps it lightweight, warm and breathable. The water repellent property is achieved by treating the fabric's exterior. This treatment needs to be renewed throughout the lifetime of the garment (every 3 washes).All Quechua ponchos and capes have a water-repellent treatment.

Shield yourself from the rain with this waterproof poncho tested in the French Alps. This rain cape is the perfect hiking accessory providing full protection for you and your backpack (up to 75L).

Waterproof

The most waterproof in the range: 5,000 Schmerbers, taped seams and sleeves.

Ventilation

Underarm zip and full zip at the front to allow fresh air to flow inside.

Easy dressing

Large front zip the full length of the garment: it is put on like a jacket.

Compatibility

Internal volume can shelter a backpack of between 0 and 75 Litres.

Compact design

Pocket for easily storing the cape.Size: L25 x H23 x D5 cm

Lightweight

From 510g (S/M) to 580g (L/XL) so you can forget about it at the bottom of your bag.

Durability

Polyester fabric with good resistance to tearing.

Designed and tested in the French Alps this poncho with its long sleeves and full zip means you can put it on easily.