Adult's Inflatable Life Jacket LJ 150N AIR - Black

Designed for sailors who weigh between 40 and 130 kg with a waist circumference of 60 to 130 cm.

When dropped in water, the salt bobbin dissolves instantly, piercing the canister of compressed CO₂ and inflating the bladder in less than five seconds.To re-arm the jacket:- Deflate it using the back of the oral inflation tube cap.- Fold the bladder and close the textile cover.Change the cartridge and the salt bobbin following the instructions for the re-arming kit: 8303768

- CO² cartridge: check that it has not been perforated, there are no signs of corrosion, and it is firmly screwed in- Trigger (black): firmly screwed in, has not expired, the green cap is present- the perforating mechanism (yellow): the green seal (green triangle) is present, indicating that the jacket has not been triggered.- The jacket: Complete and with no signs of wear (tears, fraying), inflatable bladder stored away in its bag.

In addition, regularly (at least once a year):- Inflate the life jacket using the mouthpiece and leave inflated for 24 hours: the pressure of the life jacket must not drop- Check the expiry date of the trigger

Be careful to install in the correct order:1. Remove the CO² bobbin and the salt bobbin2. Replace the salt bobbin3. Replacing the CO² cartridgeIf you do not follow this order of installation, there is a risk of striking the new cartridge if the trigger system for the salt bobbin has been previously used.

The dates shown on the CO² cartridge and the salt bobbin have different meanings:- Salt bobbin = expiry date in the following format: 05 2025 (May 2025). The bobbin must be replaced after this date.- CO² cartridge = date of manufacture, in the format 05 2021 (manufactured in May 2021): The cartridge must be replaced 5 years after this date.

The trigger uses a UML salt bobbin that is water- and humidity-sensitive.Storing it in a humid, poorly ventilated and/or warm place can cause condensation, triggering it.To avoid untimely triggering, we recommend making sure that the jacket is dry (inside and outside) before storing it in a well-ventilated place.Storing it in a humid, poorly ventilated and/or warm place can cause condensation, triggering it.

The trigger uses a UML salt bobbin that is water- and humidity-sensitive.Storing it in a humid, poorly ventilated and/or warm place can cause condensation, triggering it.To avoid untimely triggering, we recommend making sure that the jacket is dry (inside and outside) before storing it in a well-ventilated place.Storing it in a humid, poorly ventilated and/or warm place can cause condensation, triggering it.